EUDR · 2023/111530.12.2026 — 42 days
EUDRcheck

EUDR for conveyor belt and industrial belting manufacturers

Conveyor and transmission belting left EUDR scope in September 2026. Here's what that changes, and what still applies if you buy natural rubber to make belts.

7 min read6 primary sources
On this page
  1. 01What exactly was removed, and when
  2. 02Does this mean conveyor belt manufacturers have no EUDR obligation at all
  3. 03Why the EUDR works this way
  4. 04Who in a belting supply chain owes what
  5. 05Where belting-grade natural rubber actually comes from
  6. 06Deadlines that still apply if you are the operator
  7. 07What to check now

Not any more. Delegated Regulation (EU) 2026/2102 deleted conveyor and transmission belting (CN ex 4010) and the general vulcanised-rubber catch-all (CN ex 4016) from Annex I to the EUDR, with effect from 18 September 2026. If you manufacture conveyor belts, transmission belts or belting, your finished product is no longer a listed EUDR commodity or relevant product. But if you buy raw natural rubber to make that belting, the obligation has not disappeared — it has just moved to an earlier point in your supply chain.

What exactly was removed, and when

The Commission's recital explaining the deletion is specific about why: conveyor and transmission belts, and the broader catch-all for other vulcanised rubber articles not elsewhere specified in Chapter 40, "contain low amounts of natural rubber and therefore their contribution to deforestation is limited." Subjecting them to full due diligence was judged disproportionate to that limited contribution, so both entries were struck out entirely rather than narrowed.

What changed Detail
Entry deleted ex 4010 — conveyor or transmission belts or belting, of vulcanised rubber
Entry deleted ex 4016 — other articles of vulcanised rubber, not elsewhere specified in Chapter 40
Legal instrument Commission Delegated Regulation (EU) 2026/2102, amending Annex I to Regulation (EU) 2023/1115
Published 17 September 2026, Official Journal L series
Took effect 18 September 2026 — the day after publication, per Article 2 of the delegated regulation
Deferred to 2027? No. Unlike the products added by the same regulation, deletions carry no deferral — they applied from entry into force

This is a deletion, not a narrowing like the one applied to retreaded tyres in the same instrument (CN ex 4012, cut down to tyre treads only). Conveyor and transmission belting, and the ex 4016 catch-all, are gone from Annex I outright. There is no sub-category of belting that remains listed.

Does this mean conveyor belt manufacturers have no EUDR obligation at all

Not necessarily, and this is the part worth getting right. Annex I lists two kinds of entry: the raw commodity itself (natural rubber, CN 4001) and specific downstream "relevant products" made from it. The belting entry you no longer have to worry about was a relevant-product entry — it covered the finished belt or belting as a manufactured article. It never covered the natural rubber that goes into making one.

If your business imports raw natural rubber, rubber latex, or other still-listed intermediate rubber forms (compounded unvulcanised rubber under ex 4005, vulcanised rubber sheet under ex 4008, and so on) from outside the EU in order to manufacture belting, that import is placing a relevant commodity on the EU market. The due diligence obligation attaches there, at the point the raw material enters the EU market, regardless of what you go on to make from it. Losing the finished-product entry does not remove the obligation on the input.

Your position In scope?
You import raw natural rubber (CN 4001) to compound and manufacture belting in-house Yes — you are the operator placing the commodity on the market
You import rubber sheet, strip or compounded rubber (ex 4005–ex 4008) to fabricate belting Yes — these entries remain in Annex I
You buy already-compounded or already-vulcanised rubber material from an EU-based supplier who imported it No filing of your own — you are downstream, holding the supplier's reference number
You import finished conveyor or transmission belting as a trade good to resell No — the finished belt is no longer a listed product
You manufacture belting entirely from synthetic rubber or other non-natural-rubber compounds No — synthetic rubber has never been an EUDR commodity

The practical effect is that a belting manufacturer who imports its own raw natural rubber has exactly the same obligation it had before September 2026. What changed is narrower than it sounds from the headline: the finished belt stopped being separately listed, but the raw material you turned into that belt never stopped being listed.

Why the EUDR works this way

The regulation is built around tracing deforestation risk back to where land was cleared or degraded to produce a commodity — that risk sits with the raw natural rubber, at the plantation or smallholding it came from, not with any particular shape the rubber is later pressed, extruded or vulcanised into. Annex I's relevant-product entries exist mainly so customs can identify in-scope goods crossing the border by tariff code, without an inspector having to work out what a finished article is made of from its CN heading alone. Removing a relevant-product entry because its natural rubber content is typically low is a statement about the finished article's import profile, not a reclassification of natural rubber itself as safe to leave untraced.

This is also why the wider rubber and tyre picture is worth reading alongside this page if belting is only part of what you deal in: the same Delegated Regulation that removed belting also narrowed the retreaded-tyre entry and left natural rubber, rubber sheet and several other rubber relevant-products exactly where they were.

Who in a belting supply chain owes what

Three positions recur in belting manufacturing, and they are not interchangeable:

  • The importer of raw natural rubber or listed intermediate rubber forms is the operator. It produces the due diligence statement — geolocation of the plot or plots the rubber came from, a risk assessment (unless the origin qualifies for simplified due diligence), and a reference number filed in TRACES — before the material can be placed on the EU market.
  • A belting manufacturer buying already-compounded rubber material from an EU supplier, rather than importing raw material itself, is downstream. Since Regulation (EU) 2025/2650, a downstream business does not file its own statement; it holds the upstream reference number and keeps records of who it bought the material from.
  • A business that only sells or installs finished belting, with no exposure to raw natural rubber at any point, has no filing obligation under the current Annex I — the product it handles is no longer listed, and it is not the one placing any listed commodity on the market.

If you both import your own natural rubber for some lines and buy in compounded material for others, you hold both roles simultaneously, for different parts of your business — operator for the first, downstream for the second.

Where belting-grade natural rubber actually comes from

Natural rubber supply is concentrated in a handful of countries, and EUDR country risk tiers are not uniform across them, which matters if you are still the one filing the due diligence statement.

Country EUDR risk tier
Thailand Low
Vietnam Low
India Low
Indonesia Standard
Malaysia Standard
Côte d'Ivoire Standard

Thailand, Vietnam and India sit in the Commission's low-risk tier under Implementing Regulation (EU) 2025/1093, which allows simplified due diligence under Article 13 — no separate risk assessment or mitigation step — provided every plot in a consignment is genuinely low risk. Blend rubber from a low-risk and a standard-risk country in the same shipment and the whole consignment is treated as standard risk; the simplified route needs a clean, single-tier batch.

Deadlines that still apply if you are the operator

Losing the finished-belting entry does not move your deadline if you remain an operator through raw material imports. The ordinary size-based split applies:

Your business Deadline
Large or medium operator or trader 30 December 2026
Micro or small operator or trader 30 June 2027

Rubber and rubber-derived products were never covered by the old EU Timber Regulation, so the exception that pulls some micro and small timber businesses forward to the earlier date does not apply to a belting manufacturer. The full deadline rules, including how operator size is calculated under Directive 2013/34/EU for group structures, cover this in more depth.

What to check now

  • Where does the natural rubber in your belting actually come from, and do you import it yourself or buy it already compounded within the EU?
  • If you import it yourself, do you have plantation or smallholding-level geolocation for it, and does it qualify for the low-risk simplified route?
  • If you buy compounded or vulcanised rubber material from an EU supplier, do you hold their due diligence reference number, and are your purchase and sales records in order to support that?
  • Does any part of your product range still touch a listed Annex I entry — raw natural rubber, rubber sheet, rubber thread or cord — even though the finished belt no longer does?

A manufacturer that has checked all four and still imports no listed commodity or relevant product directly has a genuine case for being out of scope entirely. One that imports raw natural rubber has the same obligation it always did; only the paperwork on the finished belt itself has gone away.

Check what the EUDR actually requires of your specific role in a rubber supply chain, including whether a 2026 Annex I change has taken a product of yours out of scope, or left an upstream obligation in place that the headline change obscures.

General information about Regulation (EU) 2023/1115 as amended, not legal advice. EUDR scope is determined by customs (CN) code — confirm your own classifications before acting on this. Checked against primary sources on .

Questions

Frequently asked

01Are conveyor belts covered by the EUDR?

No, not as a finished product. Delegated Regulation (EU) 2026/2102 deleted the CN ex 4010 entry for conveyor and transmission belts or belting of vulcanised rubber from Annex I, with effect from 18 September 2026. Belting is no longer a listed relevant product.

02When did conveyor belts stop being an EUDR product?

18 September 2026, the day after Delegated Regulation (EU) 2026/2102 was published in the Official Journal on 17 September 2026. The deletion took effect immediately on entry into force, unlike new Annex I additions made by the same regulation, which do not apply until 30 December 2027.

03If my finished belt is out of scope, am I completely free of EUDR obligations?

Only if you do not import raw natural rubber or other still-listed rubber intermediates yourself. If you import natural rubber (CN 4001) or listed intermediate forms such as compounded rubber (ex 4005) or vulcanised rubber sheet (ex 4008) to manufacture belting, that import remains a due diligence trigger regardless of what you make from the material afterwards.

04What is CN 4016 and why was it removed too?

CN ex 4016 was a catch-all Annex I entry for other articles of vulcanised rubber not specified elsewhere in Chapter 40 of the Combined Nomenclature. The Commission removed it alongside ex 4010 on the same reasoning: both categories typically contain low amounts of natural rubber relative to their bulk, so regulating them was judged disproportionate to their actual contribution to deforestation.

05Do I need to keep any due diligence records if I only buy finished belting to resell?

No due diligence statement is required for finished belting itself, because it is no longer a listed product. You have no obligation under the EUDR in that specific transaction, whether you are based in the EU or selling to it.

06Is synthetic conveyor belting ever in scope?

No. Synthetic rubber, PVC and fabric-reinforced synthetic belting have never been EUDR commodities. The regulation only ever reached belting through its natural rubber content, and the belting entry that did that is now deleted in any case.

07What EUDR deadline applies to a conveyor belt manufacturer who still imports raw natural rubber?

30 December 2026 for a large or medium operator, 30 June 2027 for a micro or small operator. Rubber was never an EU Timber Regulation product, so the earlier-deadline exception for some micro and small timber businesses does not bring this forward.

08Where can I find the exact legal text that removed conveyor belts from Annex I?

Recital 11 and Article 1 (read with point (v) and point (y) of the Annex) of Commission Delegated Regulation (EU) 2026/2102, published in Official Journal L, 17 September 2026, and available on EUR-Lex.

References

Sources

  1. [1]Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115 (EUR-Lex, full text PDF)
  2. [2]Commission Delegated Regulation (EU) 2026/2102 (Official Journal landing page, EUR-Lex)
  3. [3]Regulation (EU) 2023/1115 on deforestation-free products (EUR-Lex)
  4. [4]Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 (EUR-Lex)
  5. [5]Commission Implementing Regulation (EU) 2025/1093 — country benchmarking (EUR-Lex)
  6. [6]European Commission — EUDR Delegated Act on product scope and Implementing Act on the Information System
Keep reading